V-Twin/Cruiser Galfer V-Twin Performance Motorcycle Braking Systems

pads

Brake Pads

Pad compounds offered in semi-metallic (black backing) or sintered (gold backing)

The 1054 Semi-Metallic carbon is an OEM replacement upgrade. Great feel, long lasting, quiet and very little rotor wear with this durable compound. Good in wet and dry conditions, a perfect pad for commuting, touring and everyday use.

The 1370/71 Sintered is an HH rated pad with excellent feel and modulation. This pad compound is built for moderately aggressive every day and spirited riding. Will withstand higher temperatures without fading. Great heat recovery, easy on the rotor and great for the heavier cruiser bikes this is our most popular high-performance compound.

All pads are precision made in the Galfer factory in Spain.


lines

Steel Braided Lines

Aftermarket stainless steel brake lines may look similar, but they are not the same!

Galfer lines come in single to multiple line kits, with and without ABS and almost everything in between

Every Galfer stainless steel line is made with only DuPont virgin grade PTFE inner core, 64 strand braid and our fittings are probably the most expensive, but highest quality you can find on the planet. These are the same fittings that Ferrari, Lamborghini, and Ducati uses, among a few other high end OEMs. Our lines come with a lifetime warranty. Not because we make them at a low cost and can afford to easily ship out replacements, but because they are made extremely well. We also include most mounting components, extra washers, line end labeling, and bike specific installations, all can be found under the Technical Page. R&D and manufacturing is here in the US, along with our customer accessible tech support team. Line color available includes clear, black, blue, green, gold, red, platinum, orange, pink, yellow, white and smoke. Pre-positioned Banjo fittings available in silver, gold, black, blue and red

Race team tested and proven, all lines are precision made in the US Galfer factory in Carson City, NV.


Brake Rotors

The only corners we cut at Galfer USA are with a laser. Providing you the highest quality materials and process to give you a high-performance, long lasting brake rotor. Galfer USA has several brake rotor designs, but is famous for our Wave© brake rotor design. This design was invented by Galfer in the early 90s as a solution to water and mud on brake rotor surfaces of trial competition motorcycles. As we developed the desig, we discovered an added benefit: the brake system was running cooler. When we combined our new design with the premium materials we had already developed for our round rotors, the resulting breakthrough began the new generation of brake rotor technology - led by Galfer.

EXPLORE OUR OPTIONS

Standard Floating Wave© Rotor

  • Designed for both street and track use.
  • Keeps brake system cooler by allowing air to pass over every point of a brake pad surface.
  • Best friction surface of any stainless steel brake rotor.
  • Full Floating Wave© blades ensure optimum pad-to-rotor contact for maximum stopping force and feel
  • Seamlessly replaces stock brake rotor.
  • Extremely predictable and consistent.
  • Provides outstanding performance even in the most aggressive conditions.
  • Drastically increases lever feel / modulation and brake torque.
  • Rear Floating Wave© Rotors offered for limited applications.
  • Colored button options available.

Oversize Floating Wave© Rotor

  • Oversize 12.5 and 13 inch rotors for v-twin applications.
  • Same outstanding quality and construction as our patented and trademarked Galfer Wave© Rotors.
  • Some radial mount options available.
  • Available with black or contrast-cut carriers.
  • Colored button options available.

Radial Mount Oversize Floating Wave© Rotor

  • Oversize 12.5 inch rotors for v-twin applications.
  • Made exclusively for radial mount calipers.
  • Same outstanding quality and construction as our patented and trademarked Galfer Wave© Rotors.
  • Some radial mount options available.
  • Colored button options available.

Floating Round Rotor

  • "Floating" design allows for play between the blade and carrier, drastically decreasing the liklihood of warping.
  • Same outstanding quality and construction as our patented and trademarked Galfer Wave© Rotors.
  • Made for the performance enthusiast wanting to retain the classic look of round rotors.
  • Colored button options available.
  • Black, contrast-cut and polished carrier options available.

Round Rotor

  • Same outstanding quality and construction as our patented and trademarked Galfer Wave© Rotors.
  • Made for the performance enthusiast wanting to retain the classic look of round rotors.
  • Available for select Harley Davidson front and rear applications.


WHY RIDE THE WAVE?

Wave© Rotor Features

  • 420 High Carbon Proprietary Virgin Stainless Steel.
  • Laser cut (not stamped like most others).
  • Parallel Double Disc Ground for true parallel surface.
  • Heat-treated for each specific application.
  • Each design is CAD-CAM designed and stress analyzed.
  • KBA and TUV approved.
  • Aluminum relocation brackets (7075 T6 6082 T6)
  • Carrier options include aluminum or stainless steel.
    • Aluminum (7075-T6-6082 T6)
    • Stainless Steel (AISI 420)
  • Light weight rotor.
  • More braking power.
  • Better heat dissipation.
  • Excellent resistance to corrosion.
  • Less tendency to warp.
  • Floating and solid mount rotor options.
  • Maintains cleaner pad-disc contact surface.
  • Race proven.
  • Bike-specific instructions.
  • 6 month warranty (when used with Galfer brake pads).
    • Warranty still valid if used for racing.

WAVE© IS AN AMERICAN BRAND REGISTERED BY GALFER USA

V-TWIN PRODUCT RUN-DOWN